Hours
8:30 a.m. to 12:00 p.m. / 1:00 p.m. to 4:00 p.m. MST – Monday through Friday
Holiday Closures for 2011
May 30th Memorial Day, July 4th Independence Day, September 5th Labor Day, November 24th and 25th Thanksgiving, December 26th and 27th Christmas, December 30th New Year’s.
Ordering
Orders placed by 3pm MST will typically ship same day. All orders will ship via Ground service unless otherwise noted. Customer will incur all shipping costs.
Payment
All customers are on a NET 30 payment schedule unless otherwise negotiated. Payments may be made with check, Visa, MasterCard, or American Express. A finance charge of 1.75% will be applied to past due balances over 30 days. In addition to finance charges, a monthly late fee of up to fifty dollars may be applied to those with repeated on-time payment issues. Customers with repeated payment issues will be placed on a credit card or COD basis. Customers with on-time payment issues that are required to pay via credit card or COD with incur all expenses associated with COD and or credit card charges.
Warranty
All parts, with the exception of Suspension Sleeves, have a 12-month warranty against manufacturing defects and workmanship. Any part found defective under normal and correct use will be replaced at no charge with the same item. If an item is replaced under warranty, the replacement part is shipped as soon as possible and will be invoiced for full retail value. Upon receipt of the warranty item, a credit will be issued under the terms that apply. All suspension sleeves have a 30 day warranty against manufacturer defect.
Returns
Within 30 days any part may be returned with no restocking fee. After 30 days a 15% restocking fee is charged for all parts. There are no returns after 6 months. The customer regardless of condition of parts always incurs original shipping costs. A Return Authorization number must be issued prior to returning to ensure proper credit.
Credit Application
Click HERE to download our Credit Application.
OUR PRODUCTS
ADHESIVES & SILICONE | AIR-LOCK & SMALL AIR-LOCK | CASTING & FITTING TOOLS
CONNECTORS & ADAPTERS | EOVC LOCK | EXPULSION VALVES | GROMMET LOCK | LANYARD LOCK
MODIFICATION & FABRICATION TOOLS | SUCTION LOCK | SUMMIT LOCK
CONNECTORS & ADAPTERS | EOVC LOCK | EXPULSION VALVES | GROMMET LOCK | LANYARD LOCK
MODIFICATION & FABRICATION TOOLS | SUCTION LOCK | SUMMIT LOCK
Adhesives & Silicone
| CD4150 | Coyote Quick Adhesive, 50cc and one mix tip 30 sec set time / 2 hr full cure requires dispensing gun CDDMA51 and mix tips either CD401, CD402, or CD403 |
 |
| CDDMA51 | Dispenser for 50cc Quick Adhesive |  |
| CD401 | Mix tip for 50cc Adhesive, 6 pack 3.25″ length |
 |
| CD402 | Mix tip for 50cc Adhesive, 20 pack 3.25″ length |
 |
| CD403 | Mix tip for 50cc Adhesive,100 pack 3.25″ length |
 |
| CD4180 | Coyote Quick Adhesive, 180cc 30 sec set time / 2 hr full cure requires dispensing gun CDDMA180 and mix tips CD410 |
 |
| CD5180 | Fast set Silicone, 180cc 1 minute set time requires dispensing gun CDDMA180 and mix tips CD410 |
 |
| CDDMA180 | Dispenser for 180cc Quick Adhesive and Silicone |  |
| CD410 | Mix tip for 180cc adhesive and silicone, 12 pack 5.38″ Length |
 |
| CD4150B | Coyote Quick Adhesive, 50cc, 8 pack 30 sec set time / 2 hr full cure requires dispensing gun CDDMA51 and Mix tips either CD401, CD402, or CD403 |
 |
Air-Lock & Small Air-Lock
| CD103 | Air-Lock w/ Pin, no connector 2.5″ diameter, 97 grams Packaged with fabrication tooling for thermoforming or laminating |
 |
| CD103S | Small Air-Lock w/ pin, no connector 1.5″ diameter, 48 grams Packaged with fabrication tooling for thermoforming or laminating |
 |
| CD103MDI | Insert for Alignable Connector, multiple direction offset .33″ of offset in multiple planes, 10 grams Order with CD103AF to replace the discontinued CD103FF |
 |
| CD103SDI | insert for Alignable Conenector, single direction offset .33″ of offset , 16 grams Order with CD103AF to replace the discontinued CD103FF |
 |
| CD113P8 | 8 Click Pin for Air-Lock, Small Air-Lock, Suction Lock, and EOVC Lock 1.31″ length please reference pin spacer chart for use of spacers and distal cushions |
 |
| CD316A | Casting Handle and Casting Pin for Airlock Can be used with CD112MF |
 |
| CD316SA | Casting Handle and Casting Pin for Small Airlock can be used with CD112MF |
 |
| CD103WH | Lock Wrench for Air-Lock, Small Air-Lock, Suction Lock, CQL Valve |  |
| CD103RBC | Release Button Cover for Air-Lock, Small Air-Lock and Suction Lock |  |
| CD103ELP | Exo Lamination Plug for Air-Lock, Small Air-Lock and Suction Lock |  |
| CD103P9 | Air-Lock and Small Air-Lock long pin 1.62″ length Airlock must be modified to use long pin. Should be used with distal cushion. |
 |
| CD103GPN | Guide Pin for extending length of pin |  |
| CD103PC | Pin Cap for releasing lock housing |  |
| CD103AF | Alignable Four Hole connector, no insert .6″ offset in multiple planes, 35 grams includes fabrication tooling Pediatric version available |
 |
| CD103B | 6 pack Airlocks with pins, no fabricaiton parts or connectors if fabrication tooling is needed order Air-Lock Fabrication Kit CD100FK |
 |
| CD103SB | 6 pack Small Airlocks with pins, no fabricaiton parts or connectors if fabrication tooling is needed order Small Air-Lock Fabrication Kit CD100SFK |
 |
| CD103AFB | 6 pack Alignable Connector no fabrication tooling included. If fabrication tooling is needed order Air-Lock Fabrication Kit CD100FK |
 |
| CD103MDIB | 6 pack of multiple direction offset inserts Used with CD103AF or CD103AFB |
 |
| CD103SDIB | 6 pack of single direction offset inserts Used with CD103AF or CD103AFB |
 |
| CD103FK | Airlock Fabrication Kit includes fabrication tooling for the Air- Lock and alignable connector |
No picture available. |
| CD103SFK | Small Airlock Fabrication kit includes fabrication tooling for the Small Air-Lock and alignable connector |
No picture available. |
| CD103LFC | Large Casting and Fab Dots, 50 pack 0.87″ diameter adhesive backed foam circle |
 |
| CD103SFC | Small Casting and Fab Dots, 200 pack 0.38″ diameter adhesive backed foam circle |
 |
| CD103HG | Housing for Air-Lock 2.5″ diameter |
 |
| CD103SHG | Housing for Small Air-Lock 1.5″ diameter |
 |
| CD103LP | Lock Plate and springs for Air-Lock and Small Air-Lock |  |
Casting & Fitting Tools
| CD316 | Casting Handle and Casting Pin for Suction Lock, EOVC Lock, Lanyard Lock |  |
| CD316A | Casting Handle and Casting Pin for Airlock | |
| CD316SA | Casting Handle and Casting Pin for Small Airlock | |
| CD306 | Casting Bungee |  |
| CD308 | Casting Bags, 100 pack |  |
| CD103LFC | Large Casting and Fab Dots, 50 pack 0.87″ diameter adhesive backed foam circle |
|
| CD103SFC | Small Casting and Fab Dots, 200 pack 0.38″ diameter adhesive backed foam circle |
|
| CD302 | pylon spacers, 2 each 1/8″, 1/4″ |  |
| CD109 | Volume Management Pads 2 sets of 6 precut shapes |
 |
| CD312C | 2″ Fiberglass Tape, 100 rolls per case Sold by Case Only, No Distributor Sales |
|
| CD313C | 3″ Fiberglass Tape, 100 rolls per case Sold by Case Only, No Distributor Sales |
|
| CD314C | 4″ Fiberglass Tape, 100 rolls per case Sold by Case Only, No Distributor Sales |
|
| CD314C | 5″ Fiberglass Tape, 100 rolls per case Sold by Case Only, No Distributor Sales |
Connectors & Adapters
| CD103AF | Alginable Four Hole connector .6″ offset in multiple planes, 35 grams |
|
| CD103MDI | Insert for Alignable Connector multiple direction offset .33″ offset in multiple planes, 10 grams |
|
| CD103SDI | insert for Alignable Conenector single direction offset .33″ offset 16 grams |
|
| CD106 | Alinment Coupler up to .62″ offset in multiple planes Evaluation Use Only |
 |
| CD103PAF | Pediatric Aligned Four Connector .25″ offset 16 grams |
 |
| CD103PFF | Pediatric Fast Four Connector no offset 29 grams |
 |
| CD110 | Suction Connector 33 grams no expulsion valve is included |
 |
| CD108 | Integrator 2 3/8″ diameter use with CD103AF and inserts |
 |
| CD108S | Small Integrator 2″ diameter use with CD103AF and inserts |
 |
EOVC Lock
| CD114 | EOVC no connector |  |
| CD113P8 | Suction Lock and EOVC Pin | |
| CD316 | Casting Handle and Casting Pin for Suction Lock, EOVC Lock, and Lanyard Lock |
|
| CD103MDI | Insert for Alignable Connector, multiple direction offset .33″ of offset in multiple planes 10 grams |
|
| CD103SDI | insert for Alignable Conenector, single direction offset .33″ of offset 16 grams |
|
| CD112MF | Memory Foam distal Cushion set of 3 cushions adhesive included |
 |
Expulsion Valves
| CD105 | CQL Auto Expulsion Valve Quick Adhesive used for fabrication Adhesive sold separately |
 |
| CD105LP | Low Pressure CQL Auto Expulsion Valve Quick Adhesive used for fabrication adhesive sold separately |
|
| CD103WH | Lock Wrench for Air-Lock, Small Air-Lock, Suction Lock, CQL Valve | |
Grommet Lock
| CD104TM | Grommet lock with 10mm threaded pin 1″ diameter 24 grams |
 |
| CD104QT | Grommet lock with 1/4×20 threaded pin 1″ diameter 24 grams |
 |
| CD104SM | Grommet lock with 6mm threaded pin 1″ diameter 24 grams |
 |
| CD104P10 | 10mm threaded pin for Grommet Lock 1.06″ length |
 |
| CD104PQ | 1/4×20 Threaded pin for Grommet Lock 1.06″ length |
 |
| CD104P6 | 6mm threaded pin for Grommet Lock 1.06″ length |
 |
| CD103PAF | Pediatric Aligned Four Connector .25″ offset 16 grams |
|
| CD103PFF | Pediatric Fast Four Connector no offset 29 grams |
|
| CD104LP | Lock Plate and spring for Grommet Lock includes 1 spring |
 |
Modification & Fabrication Tools
 |
CD301Extractor, Socket Removal Tool includes attachment for four hole adaptors |
|
 |
CD304Plaster Scoop | |
 |
CD307Plaster Spreader | |
 |
CD309Modification handle, blue fits flat and half round blades |
|
 |
CD309PModification handle, Pink fits flat and half round blades |
|
| CD309FFlat Surform blades, 10 pack | ||
| CD309HHalf Round Surform Blades, 10 pack | ||
 |
CD311Silicone Mixing Bowl, 12 oz. | |
 |
CD320PipeVice | |
 |
CD320BBase for PipeVise |
Suction Lock
 |
CD113Suction Lock, no connector 2.38″ diameter 141 grams |
|
|
CD103MDIInsert for Alignable Connector, multiple direction offset .33″ of offset in multiple planes 10 grams |
|
|
CD103SDIinsert for Alignable Conenector, single direction offset .33″ of offset in single plane 16 grams |
|
|
CD113P8Suction Lock and EOVC Pin 1.31″ length |
|
|
CD316Casting Handle and Casting Pin for Suction Lock, EOVC Lock, Lanyard Lock | |
 |
CD112Set of 4 Silicone Molded Distal Cushion 20 durometer |
|
 |
CD112MGSilicone Distal Cushion, medium gel style 20 durometer |
|
 |
CD112SSSilicone Distal Cushion, Small Silicone Style 20 durometer |
|
 |
CD112MSSilicone Distal Cushion, medium silicone style 20 durometer |
|
 |
CD112LSSilicone Distal Cushion, large silicone style 20 durometer |
|
|
CD112MFMemory Foam distal Cushion set of 3 cushions adhesive included |
|
|
CD103WHLock Wrench for Air-Lock, Small Air-Lock, Suction Lock, CQL Valve | |
|
CD103RBCRelease Button Cover | |
|
CD103ELPExo Lamination Plug | |
|
CD103AFAlignable Four Hole connector, no insert .6″ offset in multiple planes, 35 grams includes fabrication tooling |
|
 |
CD113HGSuction Lock Housing | |
 |
CD113LPLock plate for Suction Lock |