Orthotic & Prosthetic Technologies

CONNECTORS

Coyote Design CD103AF Alignable Connector with a CD103MDI Multi Direction Insert on a CD103 Air-Lock
Coyote Design CD103AF Alignable Connector with a CD103MDI Multi Direction Insert on a CD103 Air-Lock
Coyote Design CD103AF Alignable Connector with a CD103SDI Single Direction Insert on a CD103 Air-Lock

CD103AF | Alignable Connector

Up to 0.6" of offset, 35g. Ideal for use with Air-Lock and Easy Off Locks. Can be glued to the lock in any offset position for fabrication into the socket, or keys directly onto locks when used with inserts. Eliminates need for offset components. For laminations or thermoforming. 265 lb weight limit.

CD103MDI | Multi-Direction Insert

Up to 0.33" offset in two directions. Installed into connector to allow connector to be keyed onto bottom of lock in centered position or offset in two directions. For laminations or thermoforming. Use with Alignable Connector or One-Shot Connector.

 

CD103SDI | Single-Direction Insert

Up to 0.33" of offset in one direction. Installed into connector to allow connector to be keyed onto bottom of lock in centered position or offset in one direction. For laminations or thermoforming. Use with Alignable Connector or One-Shot Connector.

 

 

CD103AF | Alignable Connector Instructions pdf

Coyote Design CD103AF Alignable Connector Coyote Design CD103SDI Single Direction Connector

CD111 | One-Shot Connector

Up to 0.6" offset, 44g. Connector with tie off ring for easier lay-ups. Lower profile than Alignable Connector. Can be glued to lock in desired location or keyed onto lock using inserts. For laminating only. 265 lb weight limit.

 

 

 

CD111 | Alignable Connector Instructions pdf

Coyote Design CD111AF One Shot Connector
Coyote Design CD111 One Shot Connector

CD119SC | Test Socket Connector

Cost affective connector designed specifically for Vivac check sockets.

Economical, cost effective, easy way to glue on a connector. Connects to standard four hole componentry with our new high strength bridging design. Bonds well with Coyote Quick Adhesive.

11/16"height, 2 3/4" diameter, reusable.

 

 

CD103PFF  |  Pediatric Fast Four Connector

Pediatric 4-hole connector that keys directly onto center of lock. 100 lb weight limit.

 

Coyote Design CD103PFF Pediatric Fast Four Connector
Boy pushing release button on a Pediatric prosthetic made with Coyote Design Grommet Lock CD104

CD103PFF | Pediatric Fast Four Connector Instructions

CD103PAF  |  Pediatric Alignable Connector

Can be used to offset the connector by up to 0.25". 100 lb weight limit.

 

 

Coyote Design CD103PAF Pediatric Alignable Connector
Coyote Design CD103PAF Pediatric Alignable Connector with cast and CD104 Grommet Lock getting ready to glue in place

CD103PAF | Pediatric Alignable Connector Instructions pdf

CD115CF5 | 5 Degree AK Connector

Capable of up to 1.5” of Offset with 5 degrees of flexion angle. The 5 Degree AK Connector is used primarily with the Coyote Design Lanyard Lock CD118 but can be used with Coyote Design pin systems or other locks in combination with the Integrator. Can be glued to the lock in any offset position for fabrication into the socket. Eliminates the need for offset components. For lamination or thermoforming. 265 lb. weight limit.

Coyote Design CD103PAF Pediatric Alignable Connector with cast and CD104 Grommet Lock getting ready to glue in place

CD103AF | Alignable Connector

Alignable connector being adjusted in transfer jig.

 

CD111 | One-Shot Connector

One-Shot connector being glued in place off set.

 

 

Fabrication with the Locking Lanyard Pin and 5 Degree Connector.

For United States product sales please contact one of these distributors.

United Kingdom

Spain

Netherlands

France

Australia & New Zealand

Kanae

Orthopedic Services

Canada

Japan

Germany

Norway

INTERNATIONAL

for all countries not listed

For international product sales please contact one of these distributors.